Skip to main content
Version: 3.13

Exchange and Queue Federation

Overview​

The high-level goal of the Federation plugin is to transmit messages between brokers without requiring clustering. This is useful for a number of reasons.

Loose Coupling of Nodes or Clusters​

The federation plugin can transmit messages between brokers (or clusters) in different administrative domains:

  • they may be hosted in different data centers, potentially on different continents
  • they may have different users, virtual hosts, permissions and purpose
  • they may run on different versions of RabbitMQ and Erlang
  • they may be of different sizes
  • they may be

WAN friendliness​

The federation plugin communication is entirely asynchronous and assumes that connections between clusters will fail from time to time. So it tolerates intermittent connectivity well and does not create coupling between remote clusters (in terms of availability).

Specificity​

A broker can contain federated and local-only components to best fit the desired architecture of the system.

Scalability with Growing Connected Node Count​

Federation does not require O(n2) connections between N brokers (although this is the easiest way to set things up).

What Does It Do?​

The federation plugin make it possible to federate exchanges and queues. A federated exchange or queue can receive messages from one or more remote clusters called upstreams (to be more precise: exchanges and queues that exist in remote clusters).

A federated exchange can route messages published upstream to a local queue. A federated queue lets a local consumer receive messages from an upstream queue when the remote queue itself does not have any consumers online.

Federation links connect to upstreams largely the same way an application would. Therefore they can connect to a specific vhost, use TLS, use multiple authentication mechanisms.

Federation documentation is organized as a number of more focussed guides:

How is Federation Set Up?​

Two steps are involved in setting up federation:

  • First, one or more upstreams must be defined. They provide federation with information about how to connect to other nodes. This can be done via runtime parameters or the federation management plugin which adds a federation management tab to the management UI.
  • To enable federation, one or more policies that match exchanges or queues must be declared. The policy will make them federated.

Getting Started​

The federation plugin is included in the RabbitMQ distribution. To enable it, use rabbitmq-plugins:

rabbitmq-plugins enable rabbitmq_federation

If management UI is used, it is recommended that rabbitmq_federation_management is also enabled:

rabbitmq-plugins enable rabbitmq_federation_management

When using a federation in a cluster, all the nodes of the cluster should have the federation plugin enabled.

Information about federation upstreams is stored in the RabbitMQ database, along with users, permissions, queues, etc. There are three levels of configuration involved in federation:

  • Upstreams: each upstream defines a remote connection endpoint.
  • Upstream sets: each upstream set groups together a set of upstreams to use for federation.
  • Policies: each policy selects a set of exchanges, queues or both, and applies a single upstream or an upstream set to those objects.

In practice, for simple use cases you can almost ignore the existence of upstream sets, since there is an implicitly-defined upstream set called all to which all upstreams are added.

Upstreams and upstream sets are both instances of runtime parameters. Like exchanges and queues, each virtual host has its own distinct set of parameters and policies. For more generic information on parameters and policies, see the guide on parameters and policies. For full details on the parameters used by federation, see the federation reference.

Parameters and policies can be set in three ways:

  • Using CLI tools
  • In the management UI if an extension plugin (rabbitmq_federation_management) is enabled
  • Using the HTTP API

The HTTP API has a limitation: it does not support management of upstream sets.

A Basic Example​

Here we will federate all the built-in exchanges except for the default exchange, with a single upstream. The upstream will be defined to buffer messages when disconnected for up to one hour (3600000ms).

To define an upstream, use one of the following examples, one per tab:

rabbitmqctl set_parameter federation-upstream my-upstream \
    '{"uri":"amqp://target.hostname","expires":3600000}'

Then define a policy that will match built-in exchanges and use this upstream:

rabbitmqctl set_policy --apply-to exchanges federate-me "^amq\." \
    '{"federation-upstream-set":"all"}'

The defined policy will make the exchanges _whose names begin with "amq." (all the built-in exchanges except for the default one) with (implicit) low priority, and to federate them using the implicitly created upstream set "all", which includes our newly-created upstream.

Any other matching policy with a priority greater than 0 will take precedence over this policy. Keep in mind that federate-me is just a name we used for this example, you can use any string you want there.

The built in exchanges should now be federated because they are matched by the policy. You can check that the policy has applied to the exchanges by checking the exchanges list in management or with:

rabbitmqctl list_exchanges name policy | grep federate-me

And you can check that federation links for each exchange have come up with Admin > Federation Status > Running Links or with:

# This command will be available only if federation plugin is enabled
rabbitmqctl federation_status

In general there will be one federation link for each upstream that is applied to an exchange. So for example with three exchanges and two upstreams for each there will be six links.

For simple use this should be all you need - you will probably want to look at the AMQP URI reference.

The federation reference contains more details on upstream parameters and upstream sets.

Inter-node connections used by Federation are based on AMQP 0-9-1 connections. Federation links can be treated as special kind of clients by operators.

Should a link fail, e.g. due to a network interruption, it will attempt to re-connect. Reconnection period is a configurable value that's defined in upstream definition. See federation reference for more details on setting up upstreams and upstream sets.

Links generally try to recover ad infinitum but there are scenarios when they give up:

  • Failure rate is too high (max tolerated rate depends on upstream's reconnect-delay but is generally a failure every few seconds by default).
  • Link no longer can locate its "source" queue or exchange.
  • Policy changes in such a way that a link considers itself no longer necessary.

By increasing reconnect-delay for upstreams it is possible to tolerate higher link failure rates. This is primarily relevant for RabbitMQ installations where a moderate or large number of active links.

Federating Clusters​

Clusters can be linked together with federation just as single brokers can. To summarise how clustering and federation interact:

  • You can define policies and parameters on any node in the downstream cluster; once defined on one node they will apply on all nodes.
  • Exchange federation links will start on any node in the downstream cluster. They will fail over to other nodes if the node they are running on crashes or stops.
  • Queue federation links will start on the same node as the downstream queue. If the downstream queue is a replicated one, they will start on the same node as the leader, and will be recreated on the same node as the new leader after any future leader elections.
  • To connect to an upstream cluster, you can specify multiple URIs in a single upstream. The federation link process will choose one of these URIs at random each time it attempts to connect.

Securing Federation Connections with TLS​

Federation connections (links) can be secured with TLS. Because Federation uses a RabbitMQ client under the hood, it is necessary to both configure source broker to listen for TLS connections and Federation/Erlang client to use TLS.

To configure Federation to use TLS, one needs to

Just like with "regular" client connections, server's CA should be trusted on the node where federation link(s) runs, and vice versa.

Federation Link Monitoring​

Each combination of federated exchange or queue and upstream needs a link to run. This is the process that retrieves messages from upstream and republishes them downstream. You can monitor the status of federation links using rabbitmqctl and the management plugin.

Using CLI Tools​

Federation link status can be inspected using RabbitMQ CLI tools.

Invoke:

# This command will be available only if federation plugin is enabled
rabbitmqctl federation_status

This will output a list of federation links running on the target node (not cluster-wide). It contains the following keys:

Parameter NameDescription
type

exchange or queue depending on what type of federated resource this link relates to

name

the name of the federated exchange or queue

vhost

the virtual host containing the federated exchange or queue

upstream_name

the name of the upstream this link is connected to

status

status of the link:

  • starting
  • {running, LocalConnectionName}
  • {shutdown, Error}
connection

the name of the connection for this link (from config)

timestamp

time stamp of the last status update

Here's an example:

# This command will be available only if federation plugin is enabled
rabbitmqctl federation_status
# => [[{type,<<"exchange">>},
# =>   {name,<<"my-exchange">>},
# =>   {vhost,<<"/">>},
# =>   {connection,<<"upstream-server">>},
# =>   {upstream_name,<<"my-upstream-x">>},
# =>   {status,{running,<<"<rabbit@my-server.1.281.0>">>}},
# =>   {timestamp,{{2020,3,1},{12,3,28}}}]]
# => ...done.

Using the Management UI​

Enable the rabbitmq_federation_management plugin that extends management UI with a new page that displays federation links in the cluster. It can be found under Admin > Federation Status, or by using the GET /api/federation-links HTTP API endpoint.